 Resistance
Temperature
Detectors (RTD)
Thermocouple (T/C)
Mineral Insulated
Element (MI)
Thermocouple & RTD's
with Transmitter
Process Connection &
Fittings
Thermocouple for Plastic /
Rubber & Pharmaceutical
Industry
Waser
/ Bolt
Thermocouple
Probes for Portable
Temperature Indicators
Thermowells |
|
|
|
SAVIO
make
Thermocouples
are
widely
used in
various
industries
as
Temperature
Sensing
Elements.
They are
important
element
of
dependable
Temperature
measurement.
SAVIO
make
thermocouple
assemblies
for
practically
every
application
covering
R & D
requirements
to
furnace
temperature.
Our
services
are also
available
to
design
and
fabricate
special
purpose
thermocouple
assemblies
as per
customer's
design
and
specifications.
Types of
thermocouples
available
are 'J'
(Iron-Constantan),
T
(Copper-Constantan),
K (Chormel-Alumel),
S
(Pt/Pt-Rh
10%),
R
(Pt/Pt-Rh
13%) &
etc.
|
|
|
|
| |
|
| |
RESISTANCE
TEMPERATURE
DETECTORS (RTD)
SAVIO make RTD
employs high purity
electrical
resistance wire, non
- inductively wound
on ceramic or glass
base material. When
RTD element
subjected to heat it
changes its
electrical
resistance value
corresponding to
variation in temp.
and thermal
coefficient. The
most commonly used
resistance element
is platinum known as
PT-100 (100 ohms at
0oC). The RTD
characteristics have
a standard pattern
for different
resistance elements
like Copper, Nickel,
Platinum etc. |
| |
|
| |
THERMOCOUPLE (T/C)
SAVIO make
thermocouple employs
two dissimilar
metals. When two
dissimilar metals
welded together at
one end subjected to
heat, it develops a
small DC voltage (EMF)
corresponding to
temperature
difference between
hot junction
(measuring) and cold
junction
(reference). The
temperature EMF
characteristics have
standard pattern for
different type of
thermocouple element
like T, J, K, R, S,
etc.
|
| |
|
| |
|
MINERAL INSULATED
ELEMENT (MI)
SAVIO make mineral
insulated (MI)
sensors are
insulated with
tightly compacted
magnesium oxide
powder enclosed in
various metal
sheaths. Hot
junction is formed
in inert gas
atmosphere and
tested for leakage
with Nitrogen gas
under pressure. The
MI sensors can be
given from few
inches to several
metres. Sheath can
be bend, twisted and
flattened to suit
application. The
junction can be
Ground or Unground. |
| |
|
| |
THERMOCOUPLE & RTD's
WITH TRANSMITTER
Temperature
transmitter in head
mounting isolated /
non-isolated /
intrinsically safe
type for RTD and
Thermocouple.
|
| |
|
| |
PROCESS CONNECTION & FITTINGS
FIXED / ADJUSTABLE
COMPRESSION FITTINGS
: These sliding
glands or three part
fittings comprising
body, ferrule and
cap are available in
both Brass and
Stainless Steel with
either BSP taper or
NPT and All
Standard, Non-
Standard sizes.
For fixing of
sensors to the
matching male /
female threaded part
on the process. The
fitting can be
positioned anywhere
along the immersion
tube, length, this
allowing a variable
immersion length.
ADJUSTABLE FLANGE in
cast M.S., Stainless
Steel or Aluminum.
|
| |
SPECIFICATION
|
Standard
Element : |
T, J, K, R, S,
RTD - Simplex or
Duplex (2 wire
or 3 wire) |
Enclosure : |
Stainless
steel, Die cast
Aluminum and
bakelite with
cable entry. |
Protection
: |
IP 55, 65, 67,
Flame proof Gr
I, IIA & IIB. |
Sheath size
: |
1 mm to 25 mm
OD to any
length. |
Terminal : |
Brass/Stainless
steel
connectors,
Spring loaded
terminal block
if required and
Colour codes for different type of Thermocouple. |
Fittings : |
Fix /
Adjustable
gland,
compression
fittings, Flang
or spring
loaded bionet with adopter. |
|
|
|
|
|
|
